How to use your Eau by TUSHY remoteUpdated 5 hours ago
Your remote controls everything — wash, temperature, lid, flush, and more. Watch the video below for a full walkthrough, then use this as a quick reference.
Remote button overview:
| Button | What it does |
|---|---|
| Stop | Cancels any active function |
| Front Wash / Rear Wash | Starts a wash cycle (up to 4 min). Press again to oscillate the nozzle — once for short range, again for longer range, again to return to fixed position |
| Flush | Flushes the toilet |
| Water Temperature | 6 settings from room temp to 102°F |
| Seat Temperature | 6 settings from room temp to 102°F. Hold 5 seconds to toggle Eco Mode |
| Dryer Temperature | 6 settings from room temp to 131°F |
| Water Pressure | 5 levels |
| Nozzle Position | 5 positions — adjusts the spray angle forward or backward |
| Dryer | 3 airflow levels. Each cycle lasts 4 minutes |
| Clean Nozzle | Runs an automatic self-cleaning cycle. Hold 5 seconds to extend the nozzle for manual cleaning |
| Cloud Spray | Activates the foaming cleanser. Hold 5 seconds to toggle automatic activation |
| Open/Close Lid | Opens or closes the lid. Hold 5 seconds to toggle auto open/close |
| Open/Close Seat | Opens or closes the seat |
| Night Light | Toggles the internal light. Hold 5 seconds to toggle the side light, display, and Kick Button light |
Special functions worth knowing:
- Rear Wash (hold 3 sec): Activates Adjustable Halo Spray mode. Hold again for 3 seconds to exit.
- Water Temperature (hold 5 sec): Toggles button beep sounds on/off
- Seat Temperature (hold 5 sec): Toggles Eco Mode — keeps your seat warm only while in use to save energy
- Dryer Temperature (hold 5 sec): Extends the nozzle for manual cleaning
- Clean Nozzle (hold 5 sec): Turns off/on the automatic nozzle clean on sit-down
Remote not responding? Check the troubleshooting article here.
Questions? Our Poo-Rus are here!