How do I use my Inlet Cap for the Spa or Hot Water Supply Cap for the Oasis?Updated 3 hours ago

Sometimes ya get a TUSHY Spa or Oasis and then realize you don't have a sink close enough to hook up the warm water side. A true bummer, we know! Good news: you can still use your bidet, cool water only, no rewiring your bathroom required.

TUSHY Spa

You can totally hook up your TUSHY Spa and use it as a TUSHY Classic. Using the cool water connection alone works just fine, and it gives you flexibility if you want to connect the warm water side in a different bathroom down the road.

Your box comes with a cap that screws onto the hot water connection under the TUSHY console, giving you a clean double seal on top of the internal valve. It's called an Inlet Cap.

Here's how to use it:

1. Remove the plastic barb fastener or metal push-to-connect adapter currently seated in the hot water port.
2. Screw on the Inlet Cap, making sure the black rubber gasket is inserted inside the cap for a tight seal.

Here's what it looks like:

Or you might receive one that looks like this.

TUSHY Oasis

Same idea, different name. You can hook up your TUSHY Oasis and use it as a TUSHY Wave, cool water connection only. This also gives you flexibility to connect the warm water side later if your setup changes.

Your box comes with a cap that screws onto the hot water inlet port, giving you a double seal on top of the internal valve. It's called a Hot Water Supply Cap.

Here's how to use it:

1. Screw the Hot Water Supply Cap onto the warm water port.
2. Make sure the black rubber gasket is inserted inside the cap for a tight seal. 

Lost your original cap? You can grab a replacement Inlet Cap or Hot Water Supply Cap from our Spare Parts page.

Want more detail specific to your model? Check out 

I don't have access to connect my TUSHY Spa to hot water at the sink!

I don't have access to connect my TUSHY Oasis to hot water at the sink!

If you have any questions at all, chat us up and a helpful Poo-Ru will be able to ASSist you.