TUSHY Support Center logo
TUSHY Support Center logo

All articles

I need some help uninstalling my TUSHY Spa 3.0!Updated a month ago

Uninstalling your TUSHY Spa 3.0 is 10x easier than installing it—seriously, you’ll be done before you can say "pristine booty!"

Grab a towel and a flathead screwdriver, and let’s do this!

  1. Shut off the water – Turn off both your toilet’s angle/water valve and your sink valve. Flush to ensure the tank is empty.

  2. Remove your toilet seat – Unscrew the seat bolts and, for the love of clean butts, keep the nuts and bolts somewhere safe. Set the seat aside like a champ.

  3. Say goodbye to TUSHY – Detach it like a breakup on good terms. No hard feelings.

  4. Unhook the flexible steel hose – Unscrew it from the mega adapter. Easy peasy.

  5. Unhook the polyurethane hose from the sink connection – Just unscrew it from the brass mini adapter.

  6. Remove the mega adapter – Unscrew it from both the toilet tank and the toilet hose.

  7. Remove the brass mini adapter – Unscrew it from both the sink connection and the polyurethane hose.

Important: Before moving to the next step, reconnect the toilet hose back to the toilet tank and sink hose to avoid turning your bathroom into an indoor swimming pool.

  1. Turn the water back on – Check for leaks. If you spot water where it shouldn’t be, turn the water off and tighten things up!
Was this article helpful?
Yes
No