How do I use the TUSHY Handheld Bidet Sprayer?Updated 12 hours ago
You've installed it. You've leak-tested it. Now for the main event.
Before every use: open the Shutoff Adapter
The Shutoff Adapter lives between your water supply valve and the Bidet Hose. Twist it counterclockwise so the handle points up (OPEN). This lets water flow to the Sprayer.
Spraying
- Lift the Handheld Bidet Sprayer out of its holder.
- Hold the Sprayer with your thumb over the pressure slider. Position the spray head a couple of inches from the area you want to clean.
- Push the slider forward slowly to turn on the water. The further you push, the stronger the spray.
- When you're done, pull the slider back to its original position until you feel a slight click. That click means it's OFF.
⚠ Note: Start slow. Water pressure varies by home, and the slider goes from gentle spritz to full-blast wash. There's no need to crank it immediately.
After every use: close the Shutoff Adapter
Return the Sprayer to its holder, then turn the Shutoff Adapter clockwise until the handle points down (CLOSED).
Always close the Shutoff Adapter after use. Leaving it open means that if any part of the Bidet develops a leak, water will run freely. Close it every time, no exceptions.
Drying off
Air dry, or pat dry with a few squares of toilet paper. Bidet users typically cut their TP use by about 80%, so you'll barely need any. A couple of pats does the job.
Other uses
The Handheld Sprayer isn't just for your backside. Use it to wash pets, rinse cloth diapers, clean the shower, or rinse your hair. It connects to your toilet's clean water supply, so treat it like any other tap.
⚠️ WARNING: For external use only. Do not use as a douche or enema. Water from your home's supply line is not suitable for internal use and can cause harm.