How do I mount the TUSHY Handheld Bidet holder?Updated 3 hours ago
Your TUSHY Handheld Bidet Sprayer comes with a holder that mounts two ways: on the toilet tank (no tools needed) or on the wall (a few screws). Pick your method below.
Option 1: Tank mounting
No drill required. This is the easiest option and works on most standard toilets.
Slide the Suction Cup into the slot on the metal hook. Make sure the top of the hook and the suction end of the Suction Cup face the same direction.
Place the hook into the Holder Body so the hole openings are aligned.
Insert the Hook-mounting Screws through the front of the Holder Body and screw them into the holes in the metal hook. This also locks the Suction Cup in place.
📝 Note: Start both screws partway before fully tightening either one. This keeps the bracket properly aligned.
Lift the toilet tank lid. Hang the Tank Hook over the edge of the tank.
Press the Holder Body firmly against the tank to secure the Suction Cup.
Replace the tank lid.
Option 2: Wall mounting
Wall mounting offers a more permanent, clean look. You'll need a drill and a few minutes.
Choose your mounting spot on the wall. Mark two drill points aligned vertically, 0.92" (23.5mm) apart. You can also hold the Holder Body against the wall and mark through the mounting holes with a pencil.
Drill a 0.25" (6.5mm) hole at each marked point, at least 1.58" (40mm) deep.
📝 Note: Set your drill to low speed and go clockwise. Slow and steady wins this race.
Press a Wall Anchor into each hole. Tap gently with a hammer if needed.
Before inserting the Wall-mounting Screws, confirm the notch on the outer rim of the Holder Body faces upward.
Insert the Wall-mounting Screws through the front of the Holder Body, then drive them clockwise into the Wall Anchors with a screwdriver.
After mounting: place the Sprayer
Snap the Handheld Bidet Sprayer into the Holder Body. Make sure it sits securely. When not in use, the Sprayer should rest in the holder with the Shutoff Adapter in the CLOSED position.
Still stuck? Our Poo-Ru team is here for your backside.